UV100E1043 AND UV100E2009 AIR TREATMENT SYSTEMS
UV100E3007 SURFACE TREATMENT SYSTEM

APPLICATION

When installed in forced air heating and cooling systems, the
UV100E Ultraviolet Systems kill airborne or surface microorganism
contaminants like mold and bacteria.
The UV systems use patented SmartLamp™ control
technology that monitors the HVAC system to operate the
lamps only when needed. This technology extends bulb life up
to five times and reduces power consumption, lowering
operating costs. The UV systems also include local
diagnostics with the SmartLamp™ LED and reset capability.

FEATURES

• SnapLamp™ features replacement lamp handle with
detachable replacement bulb, UC18W or UC36W, to
make replacement more economical.
• SmartLamp™ Control Algorithm determines optimal
UV lamp usage.
• SmartLamp™ LED shows bulb life and replacement.
• Reduced power consumption and extended bulb life.
• Communicates with other home appliances through
Enviracom™ three-wire communications bus.
• Automatic brownout and high temperature protection
for UV lamps.
• Return air models supplied with integrated airflow
sensor to monitor air flowing through ductwork.
• Dual-purpose reset button:
— Commands lamp on with a single one-second
push.
— Resets internal lamp run-time timer after bulb
replacement with extended five-second hold.
• UV-C light kills airborne bacteria and surface mold.
• UV lamp does not produce ozone.
• Easy lamp maintenance with quick, easy bulb
replacement.
• Sealed unit prevents accidental installer/homeowner
contact with high voltage and ultraviolet rays.
• Safe design prevents lamp from lighting unless base is
correctly mounted on HVAC duct.
• Lamp light indicator to safely view lamp operation.
• Power cord that plugs into 120 Vac electrical outlet.
• Five-year limited warranty.
• Meets American Lung Association® Health House®
guidelines.

Download Manual

  UV100E1043 AND UV100E2009 AIR TREATMENT SYSTEMS UV100E3007 SURFACE TREATMENT SYSTEM Manual (1.35 MB 2011-03-26 13:31:18)

Honeywell UV100RM TrueUV™ Coil Treatment System

APPLICATION
When installed at the air conditioner coil, TrueUV helps
prevent surface micro-organism contaminants such as mold
from forming on the air conditioning coil and drain pan which
can lower the efficiency of the cooling system and can allow
unwanted odors into the home.

FEATURES
• Remote mount bulb and ballast allow for flexible
installation in any application.
• 24V ballast does not require electrician to install
additional outlets.
• SnapLamp™ replacement bulb allows for easy
maintenance. No screws needed for bulb replacement.
• Ballast can be set to run continuously or to cycle -
extending bulb life.
• Shield allows installer to direct UV-C light away from
access panels for safety and onto A/C coil where the
light is needed.
• TrueUV can be installed on exterior surfaces or on
interior surfaces.
• Adjustable mounting bracket allows TrueUV to be
installed in tight locations.
• Exterior mounting requires little clearance, so TrueUV
can be installed in closets and tight spaces.
• Indicator window allows safe viewing of lamp
operation.
• UV-C light kills airborne bacteria and surface mold.
• TrueUV does not produce ozone.
• Five-year limited warranty.

Download Manual

 UV100RM TrueUV Coil Treatment System (4.73 MB 2011-03-26 12:02:58)